Building the environment

     This stage consisted of building the robot environment. For this we used a large piece of cardboard, which was glued with black tape. We initially planned not to use the robot's guide lines so that the robot would only be guided by the motion sensor, but due to sensor limitations, we decided to use these lines to increase the robot's angle of accuracy. 
    So the card has 6 lines, at the end of each is the enemy. When the robot starts its actions he is in the middle of the intersection of these lines.As enemies we used empty plastic bottles that have different colors on them, green, red, yellow. Depending on the color, the type of enemy also differs.